Inclinometers and Pendulums
GLÖTZL inclinometer probes have proven themselves thousands of times in demanding field applications. The robust and precisely manufactured mechanics, the use of powerful sensors and electronics, as well as a maintenance-friendly design, reflect the high quality of our probes. Depending on the measurement task, you can choose between two system variants. The NMGH is specifically designed for measuring vertical deformations in horizontal guide tubes, e.g., in dam embankments or for monitoring foundations. The NMGD, on the other hand, is used for measuring deformations in excavation walls, tunnel tubes, and bored piles,
but also serves for borehole measurement. The probe, cable drum, display devices, and specialized software for data collection are perfectly matched components that form a complete system.
The vector pendulum system GEPR is an opto-electronic measuring instrument designed for the automatic detection of weight pendulum systems, float pendulum systems, and wire alignments. The wire position is determined using a semiconductor laser based on the shadow casting principle. Due to its high measurement accuracy, the system is particularly well-suited for the continuous monitoring of pendulum systems in dams or shaft installations.
Type NMGH
Horizontal Inclinometer
The horizontal inclinometer probe NMGH is used for measuring vertical deformations in horizontally installed guide tubes with the aim of determining settlements and ensuring the stability of structures.
Type NMGD
Vertical Inclinometer
The NMGD is used for monitoring stability to measure various deformations and potentially unstable slopes, structures, dams, or roads.
Type NMA9
Line, Measurement and Storage Device
The NMA 9 is used to execute line measurement programs. This battery-operated measuring device works with analog and digital probes in combination with cable reels and HPG reels.
Type SNMGD
Inclinometer Chain (German)
Inclinometer measurement chains are used where the measurement effort with mobile devices is too high or where a permanent measurement is required for safety reasons.
Type BGN
Beam Sensor
The base building inclinometer is used for highly accurate measurement of changes in inclination on a building.
Type SINC
Smart-Inclinometer-Chain
The inclinometer chain Type SINC is a modular expandable chain for measuring inclination in any direction. Using state-of-the-art MEMS sensors, inclination and direction are determined in 3D.
Type MGN
Mobile Building Inclinometer
The mobile building inclinometer with wall mounting is used to detect the smallest changes in inclination in structures. Also available is the MGN as a 2-axis sensor in the x and y directions. It provides uncompromisingly precise measurement data.
Type GN5/GN10
Building Inclinometer (Tiltmeter) (German)
The compact building inclinometer is used to measure changes in inclination in structures.
Type KGI
Cardanic Bearing Tiltmeter
The KGI Tiltmeter is a high-precision instrument for permanent tilt monitoring of structures such as dams, bridges and buildings.
Type GNW
Building Inclinometer (Tiltmeter)
The building inclinometer GNW is used to record the smallest inclination changes in buildings.
Type NMG D-K
Compass Probe
The compass probe is specifically used for the positional measurement of horizontal boreholes without casing.
Type GUS/GVS/GAVS/GFB
Guide Bar
The guide rods are used for highly precise guiding and positioning of probe systems.
Type ABS 50, ABS 74, PVC 60, ALU 48
Inclination Measuring Tubes
The tubes are special guide tubes for conducting inclinometer measurements. Different versions are available depending on the inclination measurement task.
Type ABS 60 QL
Inclination Measuring Tube
The inclination measurement pipe type ABS 60 QL enables a quick connection of two measurement pipes through its special coupling – Quick Lock.
Type ABS 66
Inclination Measuring Tubes Heavy Duty
For special projects with huge lateral pressure
for earth-fill dams higher than 50 m
for horizontal application under large overburden
Type GLM
Mobile Handheld with GLM Software
The GLM is a line measuring device for recording inclination or borehole surveys. It provides a variety of monitoring mechanisms.
Type GARS
Plumb Wire Measuring Systems
GLÖTZL plumb wire measuring systems, float plummet type GARS, for determining tilt movements of structures.
Type GEPR-90
Plumb Wire Measuring Systems (German)
GLÖTZL plumb wire measuring systems, pendulum plummet type GEPR-90, for determining tilt movements of structures.